Standard
|
AISI,ASTM,GB,JIS
|
Material
|
SGCC,SGCH,G550,DX51D,DX52D,DX53D
|
Brand
|
Shandong Great Steel
|
Thickness
|
0.12-4.0mm
|
Width
|
600-1500 mm
|
Tolerance
|
+/-0.02mm
|
Zinc coating
|
40-600g/m2
|
Surface treatment
|
Unoil,dry,chromate passivated, non-chromate passivated
|
Spangle
|
Regular spangle,minimal spangle, zero spangle,big spangle
|
Coil ID
|
508mm/610mm
|
Coil Weight
|
3-8 tons
|
Technique
|
Hot rolled, cold rolled
|
Package
|
Standard seaworthy export packing:
3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve
|
Certification
|
ISO 9001-2008,SGS,CE,BV
|
MOQ
|
22 TONS (in one 20ft FCL)
|
Delivery
|
15-20 days
|
Monthly Output
|
30000 tons
|
Description
|
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. Zinc steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion
|
Payment
|
T/T, LC, Kun Lun Bank,Western Union, Paypal
|
Remarks
|
Insurance is all risks and accept the third party test
|
Galvanização a quente: o metal fundido reage com a matriz de ferro para produzir uma camada de liga, de modo a combinar a matriz e o revestimento. Galvanização a frio: A quantidade de galvanização é muito pequena, apenas 10-50g / m 2 , e sua resistência à corrosão é muito diferente da do tubo galvanizado com picado quente.
Para bobinas galvanizadas, o aço da folha é imerso em um banho de zinco fundido para fazer uma folha de zinco revestida em sua superfície. É produzido principalmente pelo processo de galvanização contínua, ou seja, a placa de aço enrolada é continuamente imersa em um tanque de revestimento com zinco derretido para fazer placa de aço galvanizada; Placa de aço galvanizada em liga. Esse tipo de placa de aço também é fabricado pelo método Hot Dip, mas imediatamente após estar fora do tanque, é aquecido a cerca de 500 ℃ para formar um revestimento de liga de zinco e ferro. Esta bobina galvanizada tem boa adesão e soldabilidade de tinta.